martin yazdzik
2007-11-03 23:55:11 UTC
Dear Friends,
Printer is perfect, scanner is dead.
setup returns folloiwng:
HP Linux Imaging and Printing System (ver. 2.7.10)
Printer/Fax Setup Utility ver. 3.1
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
0
Session management error: Authentication Rejected, reason : None of the
authentication protocols specified are supported and host-based
authentication failed
error: <b>No devices found.</b><p>Please make sure your printer is
properly connected and powered-on.
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
TypeError: function takes exactly 6 arguments (5 given)
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
TypeError: function takes exactly 6 arguments (5 given)
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
TypeError: function takes exactly 6 arguments (5 given)
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
TypeError: function takes exactly 6 arguments (5 given)
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
TypeError: function takes exactly 6 arguments (5 given)
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
More imnportant:
***@grmllap1 ~ # hp-scan
HP Linux Imaging and Printing System (ver. 2.7.10)
Scan Utility ver. 0.5
Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: No destinations specified. Adding 'file' destination by default.
warning: File destination enabled with no output file specified.
Setting output format to JPEG for color/lineart mode.
warning: Defaulting to '/root/hpscan001.jpg'.
error: Scanning disabled in build. Exiting
Scanner found -
found USB scanner (vendor=0x03f0 [HP], product=0x6611 [Photosmart C4380
series]) at libusb:005:002
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
Any ideas?
Best,
M
TypeError: function takes exactly 6 arguments (5 given)
Printer is perfect, scanner is dead.
setup returns folloiwng:
HP Linux Imaging and Printing System (ver. 2.7.10)
Printer/Fax Setup Utility ver. 3.1
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
0
Session management error: Authentication Rejected, reason : None of the
authentication protocols specified are supported and host-based
authentication failed
error: <b>No devices found.</b><p>Please make sure your printer is
properly connected and powered-on.
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
TypeError: function takes exactly 6 arguments (5 given)
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
TypeError: function takes exactly 6 arguments (5 given)
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
TypeError: function takes exactly 6 arguments (5 given)
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
TypeError: function takes exactly 6 arguments (5 given)
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
TypeError: function takes exactly 6 arguments (5 given)
Traceback (most recent call last):
File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage
self.setupPrinter()
File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter
installed_print_devices = device.getSupportedCUPSDevices(['hp'])
File "/usr/lib/hplip/base/device.py", line 298, in
getSupportedCUPSDevices
back_end, is_hp, bus, model, serial, dev_file, host, port = \
File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI
m = pat_deviceuri.match(device_uri)
More imnportant:
***@grmllap1 ~ # hp-scan
HP Linux Imaging and Printing System (ver. 2.7.10)
Scan Utility ver. 0.5
Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: No destinations specified. Adding 'file' destination by default.
warning: File destination enabled with no output file specified.
Setting output format to JPEG for color/lineart mode.
warning: Defaulting to '/root/hpscan001.jpg'.
error: Scanning disabled in build. Exiting
Scanner found -
found USB scanner (vendor=0x03f0 [HP], product=0x6611 [Photosmart C4380
series]) at libusb:005:002
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
Any ideas?
Best,
M
TypeError: function takes exactly 6 arguments (5 given)